News and Events

The challenges faced by operators of high-speed vessels, see the Dave Philipps NY Times article here, highlight a crucial area…

Congratulations to Wallaby Boats and Hitzler Werft, from all the team at Nauti-Craft on the launching of the worlds first…

Nauti-Craft personnel undertook Adventure Sailing’s Recreational Skippers Ticket. With each successful Nauti-Craft skipper successfully acquiring fundamental safe boating skills and…

Nauti-Craft signs a Letter of Intent (LOI) with ST Engineering Marine Ltd Nauti-Craft have signed a Letter of Intent (LOI)…

Nauti-Craft Pty Ltd and OFFCON GmbH have entered into a Development and License Agreement with the purpose of introducing a…

Suspension Technology Transfer Agreement – Article by Boating New Zealand (20 February 2020). Yanmar and Nauti-Craft have announced a technology transfer…

Yanmar and Nauti-Craft today announce that both companies have entered into a technology transfer agreement with the purpose of commercializing…

Nauti-Craft’s inventor and founder welcomes a new force to be reckoned with, Peter Van Rossum Director and Board Member.

Today at the Japan International Boat Show, Yanmar showcases for the first time a concept boat incorporating Nauti- Craft’s innovative…

Nauti-Craft Seaworks: direct access to the commercial marine and workboat market, its equipment and services, its innovations and its people

Unique marine suspension system on Windfarm Support vessels.

Nauti-Craft Pty Ltd is pleased to announce that it has been awarded a prestigious National award as part of the…

Nauti-Craft Marine Suspension Technology is proud to be among Fifteen Australian innovators from both the defence and civil sector that have been shortlisted for the prestigious 2017 Maritime Australia Industry Innovation Awards.

Nauti-Craft, Strategic Marine and the Carbon Trust’s Offshore Wind Accelerator talk about marine suspension tech.

Nauti-Craft Exposed: Boating New Zealand Magazine

Nauti-Craft’s Managing Director, Ken Johnsen, presented a technical paper at R.I.N.A Design & Construction of Wind Farm Support Vessels Conference in London.

Nauti-Craft’s Revolutionary Windfarm Vessel Design – Commercial

Nauti-Craft features in the Royal Institute of Naval Architects “Ship and Boat” magazine.

Nauti-Craft has recently completed its fifth project with funding assistance from the UK based Carbon Trust under its Offshore Wind Accelerator (OWA) program.

Senior executives of Nauti-Craft were delegates at the European Wind Energy Association’s (EWEA) “Offshore 2015” conference held in Copenhagen on March 10 to 12, 2015 where the Nauti-Craft technology was showcased to over 8,000 participants from 50 countries.

German companies Offcon GMBH, a offshore consulting company, and Reederie NSB, a vessel operator, showcased a windfarm support business model that incorporated the use of Nauti-Craft’s 12.5 meter “daughter craft’ concept to service wind farms. The support model displayed by Offcon showed the Nauti-Craft vessel that could dock onto the rear of a 60 meter catamaran mother ship.

nauti_craft_at_offcon

Nauti-Craft Managing Director Ken Johnsen stated after returning from the conference; “ I was very pleased to see the level of exposure given to the Nauti-Craft technology and a means to provide an improved crew transfer solution to wind farm operators. During 2014 there was a 20% increase in the number of wind turbines installed in European waters taking the number to over 2500 turbines. This rate of growth is expected to continue in coming years with a proportionate increase in the number of vessels required to service and support these turbines. Based on the level of interest expressed from major operators in this market Nauti-Craft believes it can play a large role in the market.”

Nauti-Craft’s had previously received strong interest from the wind farm industry due to the support of UK based Carbon Trust that contributed financially to the development of a 8.5 meter “2Play” demonstrator vessel which was unveiled to the industry at the Seaworks 2014 in Southampton UK last June.

Mr Johnsen commented – “the exposure at Seaworks carried over to the Copenhagen conference where a wide part of the Company’s target audience had knowledge of the Nauti-Craft technology. This led to some very productive commercial discussions with key participants in the industry.”

Nauti-Craft Pty Ltd is to present, for the first time in Australia, their latest prototype vessel “2Play” at the 2014…

2Play is a first of it’s kind 8metre catamaran.

U.K company “Carbon Trust” has announced that Nauti-Craft’s marine suspension is one of 13 concepts selected from a field of…